Manufacturing - Page 4

https://staging1.creamermedia.com/

Manufacturing News

New cement enhances road durability

7th June 2024 Construction materials supplier AfriSam’s new AfriSam Roadstab Cement is a specialised, high-quality composite cement engineered specifically for road stabilisation tasks. This cement is designed to optimise the properties of soils used in road construction, notably by reducing the plasticity and... →

Additives protect gears in industrial transmissions

7th June 2024 Industrial equipment supplier BMG has introduced the Cera Tec high performance additives to its range of industrial lubricants. The additives offer significant resistance to high temperature and pressure, effectively protecting gears in various sectors, including sugar mills, mining, chemical... →

Cost-effective corrosion technology excels in harsh climates

By: Nadine Ramdass 7th June 2024 Corrosion control specialist Cortec’s migrating corrosion inhibitors (MCIs) technology offers a cost-effective solution to extend structural service life in high-temperature areas, such as those in Gulf Cooperation Council (GCC) countries, says Cortec public relations manager Ana Juraga. The high... →

An image of a bridge being built over a canyon

REINFORCED FROM WITHIN MCI technology protects structures from corrosion including increased activity in coastal areas, salt-laden air, chloride presence or high water tables

Enhanced steel grade meets demanding needs

By: Nadine Ramdass 7th June 2024 Stainless steel producer Columbus Stainless, based in Middelburg, Mpumalanga, has improved on the “workhorse” 3CR12 utility steel by adding the high-strength 3CR12HP400 version to meet the requirements of demanding applications. 3CR12HP400 offers the necessary corrosion resistance, along with the... →

Photo by Creamer Media's Donna Slater
WIDE VARIETY Columbus offers a variety of stainless steels that can handle various environments, including the temper rolled 301L grade

Increased competition, challenges facing S African cement sector

7th June 2024 Cement producer Sephaku Cement notes that, over the last 20 years the cement industry has evolved and fragmented, which has, in part, resulted in challenges related to ineffective enforcement of regulation and quality standards, and excess capacity, in addition to the relatively new challenges of... →

Photo by
COMPLETE TRANSPARENCY Sephaku advises that integrated producers seek complete transparency from port authorities to ascertain the level of compliance when cement is imported

Company highlights updated products

By: Lumkile Nkomfe 7th June 2024 Alcohol testing equipment supplier ALCO-Safe has added two devices to its service offering. The first product is a wall-mounted device that aids access controls at the entrances of any site. This device links to the access system, through WiFi, local area networks and/or Bluetooth, and can... →

RHYS EVANS From the studies that ALCO-Safe has done with its clients and the test results its seen over the years, about 40% of workplace accidents can be directly related to alcohol use, and a further 60% of those incidents would be fatal

GDP decreased by 0.1% in the first quarter

By: Creamer Media Reporter 4th June 2024 South Africa’s GDP decreased by 0.1% in the first quarter of this year, Statistics South Africa reports. The manufacturing industry decreased by 1.4% in the first quarter, contributing -0.2 of a percentage point to the negative GDP growth. Five of the ten manufacturing divisions reported negative... →

Absa PMI dips to 43.8 in May amid uncertainty

By: Schalk Burger 3rd June 2024 The Absa Purchasing Managers’ Index (PMI) fell below 50 points to 43.8 points in May, from 54 points in April, despite the fact that there was no loadshedding that month. Absa states that the deterioration, instead, seems to have been driven by a significant drop in demand ahead of the national... →

Invest in IE3 motors before MEPS enforced

By: Tracy Hancock 31st May 2024 The time is right for South Africa and Africa, in general, to invest in IE3 motors, especially with minimum energy requirement standards (MEPS) expected to come into effect by the end of the year, says drive engineering specialist SEW-EURODRIVE electronics business development manager Willem... →

THE SMART MOVE With the impending implementation of minimum energy requirement standards in South Africa, transitioning to more energy efficient IE3 motors is the logical decision

Wedge belts transmit 30% more power

31st May 2024 Industrial equipment supplier BMG’s extensive range of industrial belting manufacturer Fenner’s power transmission components encompasses high-performance Fenner Quattro Plus Twin Wrapped (QPTW) wedge belts, which transmit 30% more power than standard Fenner drivebelts. Suitable for... →

V-belt range improves HVAC system uptime

31st May 2024 Industrial equipment supplier BMG reports that the reduced life of V-belts operating in the heating, ventilation and air-conditioning (HVAC) sector is a major concern to the industry, despite users implementing rigorous system inspection programmes in an effort to counter this trend. BMG... →

The range of Red Powertwist V belts that are manufactured by Fenner and distributed by BMG in South Africa

KEEPING IT COOL An correctly selected V Belt can maximise the uptime of air handling units in the heating, ventilation and air-conditioning sector

Specialist expands in sub-Saharan Africa

By: Nadine Ramdass 31st May 2024 Following its acquisition of chain solutions manufacturer IWIS Drive Systems South Africa in November last year, industrial supplies specialist Bearings 2000 (B2K) has become the exclusive distributor of IWIS in sub-Saharan Africa, bringing IWIS brands, including Elite, Flexon and Jwis, to B2K’s... →

An image of B2K’s managing director, Ross Trevelyan, and the CEO of IWIS Drive Systems Germany, Dr Frank Mitzschke, signing the IWIS distribution agreement in Germiston in February 2024

NEW OPPORTUNITIES B2K MD Ross Trevelya and IWIS Drive Systems Germany CEO Dr Frank Mitzschke signed the IWIS distribution agreement in Germiston during February

Household appliances receive carbon footprint certification

31st May 2024 Ten models among three products of multinational major appliance and consumer electronics manufacturer Samsung Electronics’ Digital Appliance Business division have obtained Product Carbon Footprint certification from global climate consultancy Carbon Trust. The certification measures and... →

A Samsung Fridge, air-conditioner and washing machine which all are greener from manufacture to operation

WINNING TRIFECTA The three Samsung product ranges which have been awarded Product Carbon Footprint certification from global climate consultancy Carbon Trust

HVACR firm acquired to bolster portfolio

By: Halima Frost 31st May 2024 As a way of meeting the growing need for energy efficient heating and cooling solutions, South African corporate and investment bank Rand Merchant Bank (RMB) Corvest has partnered with UK investment firm Bay Tree Private Equity and alternative investment funds manager and adviser Westbrooke... →

RMB Corvest executive Geoff Wilmot say on a stool in a grey suit

GEOFF WILMOT Africa is on the agenda in the medium term for Hawco to expand its global footprint

Supply-side support will be required if South Africa aims to join green industrialisation race

By: Terence Creamer 30th May 2024 Stable demand remains a prerequisite if South Africa has any prospect of stimulating industrialisation in the renewable-energy and battery storage value chains, Trade & Industrial Policy Strategies (TIPS) senior economist Gaylor Montmasson-Clair has reiterated. But absent complementary... →

Trade & Industrial Policy Strategies senior economist Gaylor Montmasson-Clair

Italtile announces C-suite changes

By: Marleny Arnoldi 30th May 2024 JSE-listed tile retailer Italtile has announced it will move CFO Brandon Wood to the position of COO and appoint Lamar Booysen CFO. Both will remain executive directors on the board. Italtile says the appointments align with the group’s long-standing succession plan and ongoing strategy to... →

Just Share unhappy that its question was not addressed at AMSA’s AGM

By: Darren Parker 27th May 2024 Nonprofit activist organisation Just Share has accused ArcelorMittal South Africa (AMSA) of sub-par AGM governance because the chairperson closed the company’s AGM on May 24 before addressing a question posed by the nonprofit. “This is surprising given the high levels of civil society engagement... →

Photo by Creamer Media's Donna Slater
AMSA CEO Kobus Verster

Algae offers new carbon emissions solution

By: Halima Frost 24th May 2024 Based on the concept that algae are a carbon-capture powerhouse, Austin, Texas biotech company Reactive Surfaces has invested over $2-million in the research and development of an algae-infused paint and surface area treatment, to not only capture but also sequester carbon emissions. Lichen is a... →

A microscope view of a lichen spore which is a complex life form comprising a symbiotic partnership of two separate organisms; a fungus and an algae

GROWING INTEREST The lichen life form has piqued the interest of paint manufacturers after Reactive Surfaces introduced it to paint to allow for carbon capture

South Africa must diversify into high-value exports, connect to region to boost growth

By: Schalk Burger 22nd May 2024 For South Africa to achieve economic growth that leads to improved wellbeing for its citizens, it needs to convert the primary commodities it produces into high-value exports and develop a stronger relative comparative advantage in more competitive goods than only basic metals. Further, the... →

Use resources to diversify African economies, unlock sustainable growth

By: Schalk Burger 21st May 2024 A majority of African economies, or 83%, are highly commodity-dependent and are vulnerable to external shocks, experiencing good growth when commodity prices are high, but seeing growth reversal and setbacks when prices are low. Chad, for example, experienced an average of 9% growth in GDP... →

Haul trucks in operation at a West African mine

Distributor to launch new products at Machine Tools expo

17th May 2024 Power transmission and motion control products distributor BMG will be participating at the Machine Tools Africa exhibition, which will be held at the Johannesburg Expo Centre at Nasrec, from May 21 to 24. BMG’s stand – Hall 6, F10 – will showcase the company’s comprehensive range of quality... →

EXPO PARTICIPATION BMG will be participating at the Machine Tools Africa exhibition

Industry organisation eagerly anticipates Machine Tools Africa event

17th May 2024 With a few days to go until the 2024 iteration of the Machine Tools Africa event, to be held from May 21 to 24 at the Nasrec showgrounds, in Johannesburg, industry organisation Machine Tools Merchants’ Association (MTMA) chairperson Mike Lee says all exhibitors are “getting ready to put the... →

Rubber companies urged to go green

17th May 2024 There is a strong drive in and among rubber companies to exchange fossil fuels for renewable-energy sources, says steam and boiler service provider Associated Energy Services (AES). AES Gauteng regional manager Jordan Smith and AES operations associate director Ray Lund work closely with rubber... →

AES Gauteng regional manager Jordan Smith standing in front of a company sign for AES

JORDAN SMITH AES Gauteng regional manager Jordan Smith and AES operations associate director Ray Lund work closely with rubber belting and tyre manufacturers in Gauteng and the Eastern Cape

Machine Tools Africa to play crucial role in education, skills development

By: Simone Liedtke 17th May 2024 The upcoming Machine Tools Africa 2024 exhibition will serve as a comprehensive platform for showcasing the latest innovations in machine tools and related technologies. It also plays a crucial role in education and skills development, which is vital for sustaining industrial growth in South Africa. →

INDISPENSABLE OPPORTUNITY The Machine Tools Africa expo aims to be an indispensable gathering for all stakeholders in the engineering and manufacturing industries

Company focuses on core competence in complete machining

17th May 2024 Austrian mechanical engineer WFL Millturn Technologies’ latest development has enabled the company to manufacture the complete machining of chuck parts with a diameter of 2 000 mm. The complete machining of chuck parts for the aerospace industry is one of the core competencies of WFL Millturn... →

Photo by Design Tech
UNIT FEATURES The new M20 MILLTURN has a turning machining unit with B-axis and automatic tool change on the lower system.

Boiler rebuild to be delivered to biomass power station

17th May 2024 Flow control solutions developer Valmet announced in April that it would deliver a major boiler rebuild to the Steven’s Croft biomass power station in Lockerbie, Scotland in the UK, which is operated by energy infrastructure operator E.ON. The order is included in Valmet’s orders received in the... →

The Steven’s Croft biomass power station in Lockerbie, Scotland in the UK

POWERFUL REVAMP The boiler build being undertaken by Valmet for the Steven’s Croft biomass power station will increase efficiencies and output

Solutions provider helps manage emissions reduction

By: Halima Frost 17th May 2024 As a company that delivers modern, efficient solutions for oil and gas burner and boiler installations, Combustion Technology prides itself on its continuous carbon reduction cognisance, both for its own operations and for those of its clients, says Combustion Technology MD Grant Renecle. He... →

A man in a R&D workshop working on Boiler monitoring technologies

WORKING HARD The new Mini MK9 developed by Autoflame and distributed locally by Combustion Technology it can trim the air/fuel ratio of a client's operation by monitoring the actual flame itself

Seifsa, unions commit to addressing access to housing for sector employees

By: Schalk Burger 15th May 2024 The Metal and Engineering Industries Bargaining Council (MEIBC) negotiations have concluded with a 7% wage increase over the next year for entry-level workers in the metals and engineering industry and a 6% wage increase over the next year for skilled workers. Entry-level workers will receive a... →

Seifsa president Elias Monage

Tshwane Automotive SEZ celebrates training of first cohort of youth

By: Schalk Burger 15th May 2024 The Tshwane Automotive Special Economic Zone (TASEZ) on May 14 celebrated the first cohort of 526 local youths trained in safety, health, environment and quality to participate in different parts of the automotive value chain. These skills were critical in all aspects of the automotive value... →

An automotive component factory in the TASEZ

dtic seeks to create a competitive medical technology industry with new master plan

By: Creamer Media Reporter 14th May 2024 Trade, Industry and Competition Minister Ebrahim Patel has launched the Medical Technology (MedTech) Master Plan, which is aimed at creating a proficient and competitive medical technology industry over the next three years that will supply domestic and international markets. “The medical... →

Photo by Creamer Media's Donna Slater
Trade, Industry and Competition Minister Ebrahim Patel

New electric pneumatic control valve introduced to market

10th May 2024 Custom solutions provider Bellofram Precision Controls’ new Type 2200 electric-pneumatic control valve is a tailored solution that is customisable to fit unique operational needs of specific applications. The Type 2200 is field-tested for reliability and proven performance, while simultaneously... →

TESTED AND APPROVED The Type 2200 is field-tested for reliability and proven performance, while simultaneously providing energy savings

Organisers expect record attendance at event

By: Halima Frost 10th May 2024 With ballooning foot traffic, demonstrated by an increase in attendance of 81% from 2022 to 2023, the organisers of this year’s Enlit Africa anticipate a “bumper event that will be attended by global dignitaries and industry leaders”. The Enlit Africa 2024 will be held at the Cape Town... →

A man standing on a podium at last years Enlit Africa Event

TAKING TO THE FUTURE This years Enlit Africa theme – Less Talk, More Action – aims to encourage attendees and speakers to move away from talk in favour of action and implementatio

Hydraulic engineering firm revolutionising industry standards

By: Simone Liedtke 10th May 2024 In response to growing industry demands, hydraulic repair service provider Dosco Precision Hydraulics has carved itself a niche as a leader in the supply and repair of hydraulic pumps and motors, effectively serving the mining and industrial sectors of sub-Saharan Africa for over 30 years. The... →

PURPOSE-BUILT The purpose-built facility in Sebenza, Edenvale, spans more than 3 000 m2 of workshop and warehouse space

Cooling company to highlight new concepts

By: Halima Frost 10th May 2024 After two successful webinars that unpacked the use of air-cooled condensers (ACC) for recoverable energy in power generation, thermal solutions specialist Industrial Water Cooling (IWC) aims to address future clients and investors at this year’s Enlit Africa 2024, which will be held at the Cape... →

An air-cooled condensers designed and manufactured by IWC

COOL AS A CUCUMBER According to thermal solutions specialist Industrial Water Coolin air-cooled condensers are the most efficient, green option for cooling

Cumulative effort to transform grids a hot topic

By: Halima Frost 10th May 2024 Of the 103 countries that in 2020 pledged to reduce global carbon dioxide (CO2) and methane emissions by at least 30%, 54 are African, says global technology giant Siemens South Africa CEO sub-Saharan Africa Sabine Dall’Omo. These countries have agreed to implement Nationally Determined... →

Siemens South Africa CEO sub-Saharan Africa Sabine Dall’Omo standing on a stage talking

SABINE DALL"OMO A panel – The Factors Determining Success in Transitioning to a Low-Carbon Future – will be sponsored by Siemens, and be led by Dall’Omo on May 22

New tool released

By: Simone Liedtke 10th May 2024 In a strategic move that signifies a pivotal enhancement in the confluence of digital and analogue technologies within the hydraulics and pneumatics sectors in South Africa, flow measurement technology provider Senseca is aiming to revolutionise application versatility, from small-scale machines... →

ENHANCED INTERFACE The Omniplus IO-link transmitters are specifically tailored for precision in oil flow measurements

New clean cooking equipment factory opened in Paarl

By: Rebecca Campbell 9th May 2024 Clean and renewable energy solutions company Ener-G-Africa (EGA) on Thursday officially opened its new biomass stove and cookware manufacturing facility, in the Western Cape province town of Paarl. The factory will produce two different types of stoves, and two different ranges of cooking pots.... →

A Multi-Application Fuel Efficient Cookstove

About

Engineering News is a product of Creamer Media.
www.creamermedia.co.za

Other Creamer Media Products include:
Mining Weekly
Research Channel Africa
Polity

Newsletters

Sign up for our FREE daily email newsletter

Receive daily sector news alerts

More

Subscriptions

We offer a variety of subscriptions to our Magazine, Website, PDF Reports and our photo library.

Subscriptions are available via the Creamer Media Store.

View store

Advertise

Advertising on Engineering News is an effective way to build and consolidate a company's profile among clients and prospective clients. Email advertising@creamermedia.co.za

View options

Subscribe